Standards

    Long Term Archiving & Retrieval of Digital Product Definition Data : Time Period Recommendation – SASIG

    LTR4_V1R0

    This document aims to provide an organization with the key functional and technical elements to consider when choosing a LTAR time period for a particular artifact of product data. Such a period should be retained to meet governmental or organizational requirements. These constraints can be associated with the intellectual property verification and validation; maintenance and repair actions; legal obligations associated with patent litigation, product liability, and tax considerations; and an organization’s design knowledge preservation desires. By correlation, the time period recommendation can be used to determine routine and timely disposal of a product data artifact.

    Plus d'informations
    Langue(s) disponible(s) : Long Term Archiving & Retrieval of Digital Product Definition Data : Time Period Recommendation - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Long Term Archiving & Retrieval of Digital Product Definition Data : Quality Assurance Recommendation – SASIG

    LTR5_V1R0

    This document aims to provide a comprehensive explanation of the four checking and validation functions that define the LTAR Quality Assurance strategy.

    The four functions are: Product Data Quality (PDQ) Check, Archival Rules Check, Fixity Check, and Equivalence Validation. Included is a detail description of what each function does, why it is needed, and when it should be performed.

    Plus d'informations
    Langue(s) disponible(s) : Long Term Archiving & Retrieval of Digital Product Definition Data : Quality Assurance Recommendation - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    ECM Reference Process – SASIG

    ECM4_V1R0

    This document is an addendum which provides an explanation of the SASIG ECM Reference Process.

    Its purpose is to describe additional aspects which are not explicitly covered by the SASIG ECM Recommendation due to various reasons, but which seems to be necessary in order to get familiar with the ideas behind the SASIG ECM Recommendation.

    Plus d'informations
    Langue(s) disponible(s) : ECM Reference Process - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    ECM Recommendation Part 1 (ECR) – SASIG

    ECM3_V1R0

    This chapter provides an overview of the fundamental principles and key phases of the ECR Reference Process.

    It describes the solution approaches upon which the ECR recommendation is based.

    Plus d'informations
    Langue(s) disponible(s) : ECM Recommendation Part 1 (ECR) - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    ECM Recommendation Part 0 (ECM) – SASIG

    ECM2_V1R0

    This recommendation aims to provide support for ECM processes with respect to the communication of change data between customers and suppliers using standards such as ISO10303-214 (STEP AP214) and PLM Services from the OMG.

    Plus d'informations
    Langue(s) disponible(s) : ECM Recommendation Part 0 (ECM) - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Management Presentation – SASIG

    ECM1_V1R0

    This document presents the motivation, vision, scope and expected benefits that SASIG Engineering Change Management work group anticipates from its works.

    It explains what interaction scenarios, defined messages and data model to be used to support ECM processes between customer and supplier using existing standards like PLM Services, STEP and XML.

    Plus d'informations
    Langue(s) disponible(s) : Management Presentation - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    ENGPART V2 (version anglaise)

    ENG2_V2R0

    This recommendation describes the format for information exchange needed to establish the communication between end-users. It includes corresponding administrative data used for exchange of CAD/CAM date with ENGDAT.

    Plus d'informations
    Langue(s) disponible(s) : ENGPART V2 (version anglaise)
    Disponible gratuitement Accéder

    Product Data Quality Guidelines for the Global Automotive Industry – SASIG

    PDQ2_V3R0

    Product data quality is a measure of the accuracy and appropriateness of product data combined with the timeliness with which those data are provided to all the people who need them.

    Plus d'informations
    Langue(s) disponible(s) : Product Data Quality Guidelines for the Global Automotive Industry - SASIG
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Guidelines for Combining 3D Models and 2D documentation

    EN15_V1_SASIG

    The automotive industry has increased the use of 3D CAD systems, beginning with the development stage and moving toward manufacturing and customer support. Traditionally, 2D drawings have been the medium used in manufacturing. Standards and best practices have been well established and universally adopted. Although 3D models are becoming more widely accepted and used, there are no standards, resulting in various problems being experienced within the automotive industry. The SASIG consortium has completed a project to establish standards for combining 3D models and 2D drawings. The results hereby published are these guidelines for combining 3D models and 2D CAD information. This document complements the “SASIG 3D Annotated Standard” recommendation.

    Plus d'informations
    Langue(s) disponible(s) : Guidelines for Combining 3D Models and 2D documentation
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    3D Annotated Standard

    EN06_SASIG

    Today’s technical drawings usually include a combination of a 3D model and a 2D drawing. Tomorrow’s technical drawings will incorporate only a complete annotated model containing all of the information necessary to manufacture a part. This document follows closely and intends to complement the enhance the content of the ISO 16792 standard “Digital Product Definition Data Services” by addressing all the types of information required in a technical drawing within a 3D model. This recommendation defines how to document all the information necessary for all areas (i.e. design, manufacturing, service) in a product creation process. This document complements the “SASIG Guidelines for Combining 3D Models and 2D documentation”.

    Plus d'informations
    Langue(s) disponible(s) : 3D Annotated Standard
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Data exchange between third parties Guidelines

    ECH1_V2-en

    This document is a guide for implementing exchanges between the various CAD and PLM platforms used in the French automotive industry. This guide is dedicated to all users and provides information for understanding and mastering the different exchange formats, as well as their use in daily exchanges, in the context of the various identified use cases. It presents the data exchange standard business cases used in the French automotive industry and what are the recommendend standards for each situation.

    Plus d'informations
    Langue(s) disponible(s) : Data exchange between third parties Guidelines
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Digital Engineering Visualization

    DEV1_V1R0

    This document identifies what Digital Engineering Visualization technology is, and how it can be utilized. From within the Automotive OEM & Supplier membership, key players have made a concentrated effort to identify the tools and technologies that can significantly enhance the industry’s ability to decrease its costs and time to market. The document also covers the who, when, where, and why of utilizing Digital Engineering Visualization tools.

    Plus d'informations
    Langue(s) disponible(s) : Digital Engineering Visualization
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Cardboard packaging for overseas flows (English version)

    EMB12_V6R1-en

    Ce standard définit les caractéristiques et les règles d’utilisation des emballages perdus en carton, applicables pour les produits automobiles destinés à être livrés dans des conteneurs maritimes.

    Plus d'informations
    Langue(s) disponible(s) : Cardboard packaging for overseas flows (English version) Cardboard packaging for overseas flows (English version)
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Support de cours de formation technique aux messages

    JEU2_V1R0

    Ce document comporte l’ensemble des supports de cours GALIA de la formation technique aux messages DELINS V4, CALDEL V1, KANBAN V3, AVIEXP V5, STOACT V2 et INVOIC V5.

    Plus d'informations
    Langue(s) disponible(s) : Support de cours de formation technique aux messages
    520,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Répertoire des entités ODETTE

    ENT1_V2R0

    Ce document contient toutes les entités utilisées pour modéliser la dernière version des messages ODETTE. Ce document est complété par un autre intitulé Références croisées Entités – Messages – XRF1_V2R0.

    Plus d'informations
    Langue(s) disponible(s) : Répertoire des entités ODETTE
    365,00 HT Offert aux membres , Connectez-vous Ajouter au panier

    Glossaire

    GLO1_V1R0

    Le glossaire a pour but de donner la définition de termes ou expressions qui reviennent fréquemment dans la documentation relative aux nouvelles versions des messages.

    Plus d'informations
    Langue(s) disponible(s) : Glossaire
    365,00 HT Offert aux membres , Connectez-vous Ajouter au panier